 |
 |
||
| •superior pipe cleaning solutions |
|||
•Schafer & Urbach Gmbh & |
 |
||
 |
Aqua Milling® |
||
| At ADI’s facility: Demonstration of Aqua Milling® with open ended spool pieces. |
|||
 |
Aqua Rover™ |
||
| At Client’s Power Facility: Cleaning Project in Underground Piping System. Diameters: 48 inches (1.2 m), 64 inches (1.6 m), 120 inches (3 m) | |||
 |
Pre-Commissioning Project |
||
| At client's power plant (Combined Cycle) construction site: Removal of Mill scale and construction debris from steam piping. Aqua Milling of piping in rack entering through drip legs and on lay-down yard. Calpine | |||
 |
Extremely Hard Scale |
||
| At ADI’s facility: Development and testing of various cutting heads for Bauxite removal. Alcoa | |||
 |
Video Crawler Inspection System |
||
| This state of the art video crawler developed and used by our partner “Inspector Systems” exceeds Aqua Milling® limitations such as number of 90’s and maximum length of travel. | |||
 |
Heat Exchanger |
||
| At client plant: Cleaning of vertical tube heat exchanger, entering tubes from the bottom. The 600HP Aqua Milling® Process controls all cleaning parameters to achieve unmatched cleanliness of the internal tube walls, improving heat transfer and performance. | |||
 |
Serpentine Coils Hot Pass |
||
| At client's plant: Cleaning of small diameter heater coils in customer lay- down yard. Aqua Milling is used on same coils when installed in furnace (vertical). Fully plugged coils can be unplugged. DuPont | |||
 |
Serpentine Coils Cold Pass |
||
| At client's plant: Cleaning of Heater Coils in customer lay-down yard. Aqua Milling routinely cleans same coils in vertical position (in place). Cleaning head travels through 3 to 4 180 degree bends. DuPont | |||
 |
Water Deposit |
||
| At ADI’s facility: Determining cleaning parameters and settings on customer supplied short pipe section (sample mailed to ADI). Saudi Aramco | |||
|
Aqua Milling® Flushing |
||
| Aqua Milling® Thrusters remove heavy debris such as 36" pipe wrenches or construction debris from large diameter piping. The procedure which uses a mixed air/water jet thrust is called "flushing" and can be performed to transport scale over long distances back to the entry point. General Electric | |||
 |
Sugar Deposit |
||
| At ADI’s facility: Determining cleaning speed on customer supplied spool piece. Imperial Sugar | |||
 |
Chimney Stack |
||
| 300 ft (90 m) vertical run tin smelter chimney. De-scaling of entire stack entering from the ground without any support from the top outlet. EPA Super Fund Site | |||
 |
Kiwon enTec Co., Ltd Address: 455-2 heungshinri, yangchonmyun, gimpo city, kyunggido, korea 415-842 E-mail:wonhkang@kornet.net, wonhkang@kiwonentec.com Tel: +8231-984-9571 Fax. +8231-984-9575 Web: www.kiwonentec.com |
||